COMPLETE EVOLUTION CO2 KIT

This kit contains everything you need to regulate the CO2 levels in a room, through the Evolution CO2 Controller and its probe for dynamic measurement of this gas in the air, as well as a LP CO2 Generator.

INSTRUCTIONS AND DOSAGE:

With this burner, you can increase the p.p.m of Co2 in your crop. Co2 is produced due to the combustion of propane gas. We will need propane gas (available at petrol stations, or butane sellers), and a Co2 meter to control the amount of Co2 we produce.

• A good level of Co2 is considered to be 1500 p.p.m.
• 4 burners 3.1m³/h for rooms up to 103m³ in volume or 34m² with a 3m height. 12 lights of approximately 600w.
• 8 burners 6.23m³/h for rooms up to 207m³ in volume or 69m² with a 3m height. 20-30 lights of 600w.

TIPS:

If CO2 isn't properly controlled, it can damage the plants or not show improvement in the crop. p.p.m should always be monitored with a CO2 controller.

CO2 should only be introduced starting from the 21st day of flowering and always when the light is on. You should also time the extraction or the air conditioning as it can remove all the CO2 created.

If you're using CO2, the indoor temperature should be high, from 28º to 32ºC.

INCLUDES:

• Evolution CO2 Controller
• Ecotechnics CO2 Probe
• Pure Factory LP CO2 Generator with 4 Burners.